The probe kits including the below items
1. Probe B

2. Probe C

3. Probe D

4. Low voltage test supply

1. IEC60335 / IEC60950 / IEC 61032 Test Probe B Jointed Test Finger Metal Material
material: metal, except where otherwise specified
linear dimensions in milimeters

tolerance on dimensions without specific tolerance:
on angles: 0/-10°
on linear dimensions:
up to 25mm: 0/-0.05
over 25mm: +/-0.2
both joints shall permit movement in the same plane and the same direction through an angle of 90°with a 0 to +10° tolerance.

2. IEC 60529 Test rod 2.5mm, IP3X

This wire is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.

3. Test Probe D, ​IEC60529 Test Wire 1.0mm, IP4X

Introduction:

1,  According to: IEC61032:1997,IEC60529,IEC62368-1

2, Test Probe D is a necessary appliance for domestic and similar electrical appliance of against electric shock protection test.

Technical parameters:

1, Test Probe Length :100mm

2, Test Probe Diameter:1.0mm

3,Dam- sphere Diameter:35mm

4,Handle Diameter:10mm

5,Handle Length 100mm

6, According to IEC61032 figure 4 (the Test probe D)

Application:

1, Standard test refers to the joint part can't touch the live parts or approachi to the hazardous parts, 30mm circular baffle cannot enter .

2,In the test requirement for preventing from approaching to the hazardous parts, Test Probe D need to exert a thrust 1±0.1N

4. Low voltage test supply

The electric contact power indicator is made according to IEC60335 for standard electric shock prevention test.

It provides a 40-45V power supply in the IP test for metal wire.

1. The electric contact power indicator use digital chips, it has over-current and short circuit protect function.

2. Digital display, can see the voltage clearly.

3. Sound indicator, can make you focus on the test and don't need to find an indicating light.

4. Thickening aluminum box, better for heat exchange.

5. Small size, easy to carry.

Input :AC 180-250V

Output:41-43V

Fuse:220V 2A