Quality is our life.

About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsImpact Testing Apparatus

SGS Impact Hammer Test Equipment

SGS Impact Hammer Test Equipment

small.img.alt small.img.alt small.img.alt small.img.alt

Large Image :  SGS Impact Hammer Test Equipment Get Best Price

Product Details:
Place of Origin: China
Brand Name: SHC
Certification: CNAS、TUV、ITS、CSA、BV、SGS (cost additional)
Model Number: SC-VH06
Payment & Shipping Terms:
Minimum Order Quantity: 1 unit
Price: USD1000-5000 unit
Packaging Details: carton
Delivery Time: in 15 working days
Payment Terms: T/T, Western Union, MoneyGram
Supply Ability: 999 units per month
Detailed Product Description
Standard: IEC60068-2-75 Test Ehc, UL498 Clause SD7.2 Product Name: Vertical Hammer Impact Apparatus
Function: Impact Testing Height Distance: 0-1000mm Adjustable
Hammer: 2J, 5J, 10J, 20J Stainless Steel Material: Stainless Steel
Way Of Releasing: By Manual Conduits: 4 Unit
High Light:

SGS Impact Hammer Test Equipment


SGS 20J Impact Hammer Test Equipment


SGS 5J impact hammer test

Vertical Hammer Electromagnet Release Test Apparatus Of 2J 5J 10J 20J



Technical Parameters

Power supply 230V, 50Hz
Release mode Electromagnet release
Drop floor

Nylon base 1000mm*1000mm; thickness 8mm;

hardness HRR85-100.

Drop height 0-1000mm, Electric adjustment
Impact hammer 2J, 5J, 10J, 20J, stainless steel, matching 4 conduits.
Installation mode The hammers are by electromagnet, the conduits are by screw-in.
Standards IEC 60068-2-75

Table-Height of fall (the device is standard equipped with 5J impact energy):

Energy J 0.14 0.2 0.3 0.35 0.4 0.5 0.7 1 2 5 10 20 50
Equivalent mass kg 0.25 0.2 0.25 0.2 0.25 0.2 0.2 0.25 0.25 0.25 0.5 1.7 5 5 10

Height of fall

mm ±1%

56 100 80 150 140 200 250 200 280 400 400 300 200 400 500


1. See note in 3.2.2.

2. In this part of IEC 60068, the energy, J, is calculated taking the standard acceleration due to the earth’s gravity (gn), rounded up to the nearest whole number, that is 10 m/s²


Product Introduction

This device conforms to the standard requirement of the IEC60068-2-75 Test Ehc. It is for testing enclosure mechanical strength of household and similar electrical appliances, lamps. The device is released by the electromagnet, which can ensure the instantaneous release and the vertical drop. The lifting device is combined by screw guide rail, which can make the lower end of the conduit smooth contact with the surface of the specimen, the fixed drop height is the length of the guide rail, just contact no need to adjust, easy to use. Standard equipped with 2, 5, 10, 20J hammer and conduit, it is suitable for the enclosure mechanical strength test of most products.



1. The power should be cut off after the test is completed, to prevent overheating of the electromagnet.

2. The sample should be installed before the hammer is drop, impact is not allowed without installing the sample, avoid damaging the hammer.

3. Please pay attention to being dampproof and dustproof and maintenance.


SGS Impact Hammer Test Equipment 0

Contact Details
Guangzhou Shice Equipment Co., Ltd.

Contact Person: admin

Tel: +8613538714715

Send your inquiry directly to us