Quality is our life.

About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsHousehold Appliance Test Equipment

CNAS Abrasion Resistance Test

CNAS Abrasion Resistance Test

small.img.alt small.img.alt small.img.alt small.img.alt

Large Image :  CNAS Abrasion Resistance Test Get Best Price

Product Details:
Place of Origin: China
Brand Name: SHC
Certification: CNAS、TUV、ITS、CSA、BV、SGS (cost additional)
Model Number: SC-ASRT
Payment & Shipping Terms:
Minimum Order Quantity: 1 unit
Price: USD 1000-5000 Unit
Packaging Details: Carton
Delivery Time: in 15 working days
Payment Terms: T/T, Western Union, MoneyGram, L/C
Supply Ability: 999 units per month
Detailed Product Description
Standard: IEC60950 Clause And IEC60335-1 Clause 21.2 Control System: PLC + Touch Screen
Drive Mode: Stepper Motor-driven Scratching Speed: 0-25mm/s Adjustable
Testing Times: 0-9999times,it Can Be Preset Scratching Distance: Adjustable
Working Table: 360° Rotatable Scratching Pressure: 10N±0.5N, It Can Be Equipped With The Weight Of 20N To Reach The Scratching Pressure Of 30N±0.5N
High Light:

CNAS Abrasion Resistance Test


IEC60335-1 Abrasion Resistance Test


SGS abrasion test

Abrasion Strength Resistance Testing Machine IEC60335-1 clause 21.2



Product information:

The device is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household appliances.

It conforms to the standard requirement of IEC60950 clause and IEC60335-1 clause 21.2.


Technical parameters:

Input voltage 230V/50Hz
control system PLC + touch screen
Drive mode stepper motor-driven
Scratching speed 0-25mm/s adjustable
Testing times 0-9999times,it can be preset
Scratching distance Adjustable
Working table 360° rotatable
Scratching pressure 10N±0.5N, it can be equipped with the weight of 20N to reach the scratching pressure of 30N±0.5N
Radius of Steel Pin 0.25±0.02mm


This device adopts a hardened steel pin for scratching.

The end of the pin is form of a cone having a tip angle of 40°, its tip being rounded and polished, with a radius of 0,25 mm ± 0,02 mm. Scratches are made by drawing the pin along the surface in a plane perpendicular to the conductor edges at a speed of 20 mm/s ± 5 mm/s. The pin is so loaded that the force exerted along its axis is 10 N ± 0,5 N.

The scratches shall be at least 5 mm apart and at least 5 mm from the edge of the specimen.

Scratches are made across five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests.

Contact Details
Guangzhou Shice Equipment Co., Ltd.

Contact Person: admin

Tel: +8613538714715

Send your inquiry directly to us